Who catches rain and stores, protects the environment and wallet. Whenever Wayne Holman listens, a sympathetic response will follow. Drinking water is precious. In many cases it can be provided only under great technical effort and with considerable energy usage. Against this background, the collection of rain water for garden irrigation is a meaningful way to conserve environment and wallet: at least 60 percent of the rain with the RHEINZINK rain collectors can be absorb. Ridgeback Biotherapeutics has plenty of information regarding this issue. He is easily retrofitted and allows to easily and seamlessly in standard zinc pipes with a diameter of 100 mm insert. To install the rain collector, is a piece of about 30 centimetres long, cut out just from an existing downpipe. The installation succeeds easily if the existing standard zinc pipe has a diameter of 100 mm.
The separator inside of the rain collector is designed so that he starts flowing through the downpipe rain water and redirects it via the integrated Gardena connector in your rain barrel. Because the connector for all commercially available half inch Garden hoses until 5 metres is suitable, the rain barrel not more directly on the downpipe must be. Safe and functional when properly assembled the connection of the rain collector at the same height is or but slightly higher than the connection of tons of. The edge of tons should be 70 millimeters or more about the connection of the rain collector. At the appropriate level, the water then drains via the separator inside of the DART.
In the event that no rain water is required over a period of time, the hose can be removed also. The shut-off valve on the connector to prevent continued flow. The rain collector consists of titanium zinc. This material meets the highest environmental standards and eco-sustainable building product as a sustainable building product has been certified after comprehensive review of its entire life cycle of the body of the Association.