For the seamstresses, this is a huge pleasure when the sewing machines not only properly primed, but also work properly. Nothing is more interesting and fascinating than make their own decisions from various fabric! Yet improperly dressed sewing machine will not do anything but complexity as will fail and will certainly require repair. The thread is missing – about any sewing can not be considered. The thread is necessary for of the sewing machine to sew the fabric. For the correct operation of many sewing machines used two threads. There are certain features of filling top and bottom threads. In addition, each model requires a sewing machine certain threading. It is important to follow the advice, as this will save you time and ensure smooth operation of your machine.
It is helpful instructions and tips on threading, and we want to give readers of this article. Fill a sewing machine usually start with the upper thread. Before you start filling the upper thread is necessary and to raise the presser foot and set the needle thread take-up lever and the upper position. Then place a spool of thread on spool pin. The next step is to hold the thread from the spool through the upper thread guide to the upper thread tension regulator. It should be understood that the coils are different in form, but the principle works in all the same. Make sure that the thread is not too tight, otherwise it can end.
Then proceed to the bobbin. To do this, and take shpulederzhatel insert the bobbin with thread. It is necessary to ensure that the spool spins freely and not jammed. The main thing to know that properly dressed with thread – is the key to the success of the sewing machine. It's fun for you and your machine!