For the production of breeze blocks and other building products, the following individual components: cement, aggregates, water, chemical additives – plasticizers and modifiers of concrete (at the request of customer). The binder material can be used by Portland both low and high grades, as well as medlennotverdeyuschy gypsum. As the filler used in any combination of sand, gravel screenings, concrete block, slag, ash, sawdust, peat, Styrofoam pellets, peschanogranitnaya mixture (CBC), marble chips, bricks and fight, etc. At a temperature of 20-25 C hardening products takes place in 20-25 hours. When used for shelving podblochnyh plates of steaming can be organized that will positively affect the strength characteristics and reduced curing time items, as well as reduce the production area occupied by up to 30-40 square meters. It is recommended to use Portland cement grade 400 (PC M400). When using cement mark 300 cement consumption should increase by 10%, the use of cement grade five hundredth reduces its consumption by 10-20%. For mini production breeze blocks, we recommend to purchase upgraded machine 'EP – 600'.

Its cost is 95 thousand rubles. It is intended for the manufacture of the method of volume vibropressing of heavy and light concretes wide range of products: 1.Plitka sidewalk and curb stone of various shapes and colors of the original. 2.Pustotelye and sandstone wall and partition stones, the elements overlap. 3.Dekorativnye walling and cladding stones of different colors. 4.Zabornye and lawn elements and other elements of the redevelopment. In the manufacture of concrete products used environmentally friendly materials: natural sand and crushed, lightfast pigments plasticizers, cement brand or M400 M500.