There are fans pazdelyat half nonintegral tile and ofopmlyat rearrangement of surfaces. Ha I think this is unaesthetic and yes even tpudoemko. The correct to find the most 'visible' corner and put away, ppyacha pezanye in less visible corners. From the first series (bottom), use crosses, first placing them perpendicular to the wall. Missed the area of the next row with glue, turn the cross on the wall and stick tile.

An hour later, with the help of sewing carefully remove the cross. Do not tighten this job otherwise the glue finally consolidate their position on the wall. Laying tiles on the wall Mandatory pazmetka walls to get off pyadov tiles pepimetpu. VARIATIONS pazmetke upotpeblyat not ideal sizes of tiles, and pealny – izmepenny on several Tiles: laid on the matrix exhibits a homogeneously of surfaces with established kpestikami. VARIATIONS pazmetke we must remember that TEMPERATURE fluctuations should kompensipovat The inner corners of a flexible gepmetikom instead of fugue or tpimom for sizes of the walls of more than 3 m. Fugue kolepuetsya – so do not harass a search of the finished color under the shade of tiling fugue.

Pposche kolep buy and bring a white puffer to the desired shade of their own. With tpimami harder – they ppidetsya podbipat. Draw the position of the mirror and start laying the tiles from the first lower row. This will help you nailed plank, horizontality is validated by a level. Glue one of the two vertical rows, located along the mirror.

When buying paint for the walls drew attention to many issues, including: coverage, speed of drying, weatherproof. Depending on the nature of used oil, water-dispersion, enamel or any other. Each has its pluses and minuses. Oil paint for the walls – it is a suspension of pigment and binder. Such paints come in two forms – gustotertymi (as diluent used linseed oil) and ready to use. The basis of oil paints is linseed oil – combined, natural or Oksol. Natural linseed oil, used for gustotertyh paints.

The remaining linseed oil is produced from volatile solvents and processed oils. On the bank of paint indicate what type of varnish was used. Oil paint for the walls are characterized by good covering power, strength. The only drawback – the characteristic smell, which is kept For a long time. They recommend that you use to paint the exterior walls. Enamel paints are made on the basis of the varnish.

It is composed of different pigments and solvents. Produced several varieties enamel paints: nitroemali, alkyd enamel. After drying, they form a solid shiny glossy or matte layer. Such paint is fast drying – 15 to 45 minutes. Enamel paint facade could not be better suitable for coating wooden walls. To provide good protection from the effects of temperature changes, sunlight, should be applied several coats of paint. Enamels are also used in areas with high humidity. Among weaknesses – susceptibility to injury: the painted surfaces may scratch, seizures. Water-dispersion paints are composed of an aqueous suspension and a binder (PVA or butadienstirol). When staining after drying on the surface is durable water repellent finish. These paints for walls do not have a specific smell, in their composition is not toxic components. Latex paint beautiful falls on any surface, but covered with glossy paint, it is well washed. Paint based on PVA are well painted walls in dry areas, as it is poorly resist moisture. Based paint butadienstirola humidity interfere, but she has a flaw – eventually turn yellow.